The Elmac Technologies® ESA Series of End-of-line Flame Arresters are designed specifically for short time burn events.
Elmac Technologies® AVC Series End-of-line Deflagration Arresters are designed to be installed at the end of a pipeline or exit vent from a vessel, where the ignition source is external, to provide protection against atmospheric deflagration.
A flame arrester uses an element with small apertures which allows gas or vapour to pass. If the apertures are smaller than the maximum experimental safe gap (MESG) for the gas or vapour then a flame cannot pass through the arrester and is subsequently contained or extinguished.
Elmac AVC Series End-of-line Flame Arresters are ATEX certified for gas explosion groups IIB & IIC at a maximum operating temperature of +60°C.
Elmac Flame Arresters are manufactured in accordance with EN ISO 16852 and approved to ATEX Directive 2014/34/EU.
|Size NB (mm)||25||40||50||65||80||100||125||150||200||250||300||350||400|
|Diameter ØA (mm)||178||223||255||255||300||370||370||510||510||650||750||800||950|
|Height B (mm)||135||158||177||221||225||262||266||339||341||538||582||724||770|
|Approx Wt (kg)||3.5||5.0||6.6||9.5||14||23||32||41||46||106||130||163||212|
|Arrester Materials||Carbon Steel or Stainless Steel||Low Temperature Carbon Steel, Duplex Steel, Hastelloy|
|Element Material||316L Stainless Steel||Hastelloy|
|Connections||ANSI 150 Flange||PN16 Flange, Female BSP/NPT, Male BSP/NPT|
|Arrester Finish||Painted (Carbon Steel Arresters)||Offshore Paint, PTFE Coated, Others on Request|
|Bird Screen||316 Stainless Steel||304 Stainless Steel, PTFE Coated|